Kramer DTAXRC2-OUT2-F34/STANDALONE - 2-Kanal 4K HDR HDBaseT Ausgangskarte mit analoge

Kramer DTAxrC2-OUT2-F34
2–Kanal 4K HDR HDBaseT Ausgangskarte mit analogem Ton, erweiterter Reichweite und PoE


DTAxrC2−OUT2−F34 is a two−channel, 4K@60Hz (4:4:4), CSC, HDMI, analog audio, bidirectional RS−232, Ethernet, & IR over HDBaseT twisted pair transmitter card for compatible Kramer Modular Multi−Format Digital Matrix Switchers. DTAxrC2−OUT2−F34 outputs two extended−reach HDBaseT signals with selectable embedded/de–embedded analog audio, bidirectional RS−232, IR, and Ethernet from the chassis to the line.


Features:

• Max. Resolution — 4K@60Hz (4:4:4)
• Selectable embedded or de–embedded analog audio
• Extended Reach HDBaseT 1.0
• PoE provider enabled
• Max. Data Rate — 18Gbps (6Gbps per graphics channel), 10Gbps CSC over CAT cable.
• Max. Resolution — 4K@60Hz (4:4:4).
• Analog Audio Embedding/De–embedding or ARC — On the same jack.
• HDBaseT Technology — HDTV compatible, HDCP 2.2/1.4 compliant.
• System Range — Up to 100m at normal mode (4K), up to 130m (430ft) at normal mode (2K), up to 180m (590ft) ultra mode (1080p @60Hz @24bpp). Note: When using Kramer HDBaseT cables.
• Ethernet Extension — Ethernet interface data flows in both directions, allowing extension of up to 100Mbps Ethernet connectivity for LAN communication and device control.
• Bidirectional RS–232 Extension: — Serial interface data flows in both directions, allowing data transmission and device control.
• Bidirectional Infrared Extension: — IR interface data flows in both directions, allowing remote control of peripheral devices located at either end of the extended line.
• 3D Pass–Through.
• PoE (Power over Ethernet) Enabled — Provides PoE power to a connected device with the Kramer PoE Power Supply Add–On PS–4812 (sold separately).

Technische Daten:

• AUSGANG:
  2 HDBaseT: On RJ–45 connectors
• DATENPORTS:
  2 Unbalanced Audio: On a 6–pin terminal block connector
  2 RS-232: On a 6–pin terminal block connector
  2 IR: On a 4–pin terminal block
  1 Ethernet: On an RJ–45 connector
• VERLÄNGERUNGS- LEITUNG:
  Standard Compression: Up to 100m (330ft) at 4K@60Hz (4:4:4), 4K@60Hz (4:2:0) or 4K@30Hz (4:4:4)
  Up to 180m (590ft) at full HD (1080p @60Hz 24bpp)
  High Compression: Up to 100m (330ft) at 4K@60Hz (4:4:4), or 4K@60Hz (4:2:0)
  Up to 180m (590ft) at 4K@30Hz (4:4:4)
  Up to 200m (650ft) at full HD (1080p @60Hz 24bpp)
  No Compression: Up to 100m (330ft) at 4K@60Hz (4:2:0)
  Up to 180m (590ft) at full HD (1080p @60Hz 24bpp)
  Standards Compliance: HDBaseT 1.0
  Note: When using recommended Kramer cables
• VIDEO:
  Max Data Rate: Up to 18Gbps (6Gbps per graphic channel), 10Gbps CSC over CAT cable
  Standard Compression Max Resolution: 4096x2160@60Hz (4:4:4) 24bpp
  High Compression Max Resolution: 3840x2160@60Hz (4:4:4) 24bpp
  No-Compression Max Resolution: 4096x2160@60Hz (4:2:0) 24bpp
  Compliance: HDCP 2.2, HDR 10
  HDMI Support: Deep color, x.v.Color™, lip sync, HDMI uncompressed audio channels, Dolby TrueHD, DTS–HD, 2K, 4K, and 3D as specified in HDMI 2.0
• EXTENDED ETHERNET:
  Bandwidth: Up to 100Mbps
• EXTENDED RS-232:
  Baud Rate: 300 to 115200
• ENERGIEBEDARF:
  Consumption: 21.5W
• UMWELTBEDINGUNGEN:
  Operating Temperature: 0° to +40°C (32° to 104°F)
  Storage Temperature: –40° to +70°C (–40° to 158°F)
  Humidity: 10% to 90%, RHL non–condensing
• EINHALTUNG VON VORSCHRIFTEN (EINHALTUNG VON STANDARDS):
  Safety: CE
  Environmental: Complies with appropriate requirements of RoHs and WEEE
• PRODUKTABMESSUNG:
  25.00cm x 13.00cm x 2.00cm (9.84" x 5.12" x 0.79" ) W, D, H
• PRODUKTGEWICHT:
  0.3kg (0.7lbs) approx.
• VERSANDABMESSUNG:
  29.30cm x 16.50cm x 5.90cm (11.54" x 6.50" x 2.32" ) W, D, H
• VERSANDGEWICHT:
  0.5kg (1.1lbs) approx.