Yamaha EMX 5 Powermixer 2x 630W 4 Ohm
Item number: YEMX5
Kompakter, mobiler und robuster Powermixer als Kombination aus Mischpult mit
umfangreicher Effektausstattung, Equalizer und integrierter Feedbackunterdrückung sowie
hocheffizienter 630W-Endstufe.
• 2x 630W [4Ohm], 2x 460W [8Ohm] (1kHz THD+N weniger als 10% CEA2006)
• 2x 500W [4Ohm], 2x 370W [8Ohm] (1kHz THD+N weniger als 1% CEA2006)
• Leistungsstarke, hocheffiziente Class-D-Endstufe
• 12 Line-Eingänge (8 Mono + 4 Stereo)
• Hochohmiger High-Z-Eingang (Kanal 4) für den direkten Anschluss von Gitarren und Bässen
• 1-Knopf Master EQ™
• Onboard-Feedback-Unterdrückung
• 24 unterschiedliche, professionelle Effekte
• Metallgehäuse für den langlebigen Einsatz on the road
• Große Tragegriffe für erhöhten Schutz und perfekte Mobilität
• Universal-Netzteil für bedenkenlosen Einsatz bei Stromschwankungen
• Optionales Rack-Montage-Kit erhältlich
Technische Daten:
Total harmonic distortion Input to SPEAKERS: 0.1% @ 10 W (40 Hz to 20 kHz),
0.05% @ 50 W (1 kHz) ; Input to STEREO OUT, AUX1
SEND, AUX2 SEND: 0.03% @ +14 dBu (20 Hz to 20 kHz),
0.007% @ +20 dBu (1 kHz), (THD+N, measured with 22 kHz
LPF)
Hum & noise level Equivalent input noise -117 dBu (Noise is measured with A-weighting filter)
Residual output noise Input to SPEAKERS : -70 dBu(40Hz to 20kHz, STEREO
MASTER LEVEL: min); Input to STEREO OUT, AUX1
SEND, AUX2 SEND : -82dBu(20Hz to 20kHz, STEREO
MASTER LEVEL: min) (Noise is measured with A-weighting
filter)
Crosstalk -85 dB (1 kHz, Measured with 1 kHz band pass filter)
Protection circuit Load protection DC-fault
Amplifier protection Over heat protection, Over current protection, Integral power
protection
Power supply protection Over heat protection, Over current protection
Power requirements AC 100-240V, 50Hz/60Hz
Dimensions W 465 mm (18 5/16")
H 308 mm (12 1/8")
D 325 mm (12 13/16")
Net weight 9.5 kg (20.9 lbs)
Accessories Owner’s Manual, Technical Specifications, AC power cord
(2.5 m)
Power consumption 42 W (Idle) / 210 W (1/8 Power)
Others Operating Temperature : 0 to +40° C
Frequency response Input to SPEAKERS : +1 dB/-3 dB (40 Hz to 20 kHz), Input
to STEREO OUT, AUX1 SEND, AUX2 SEND : +0.5 dB/-1
dB (20 Hz to 20 kHz) , refer to the nominal output level @ 1
kHz
Options Foot switch: FC5, Rack-mount brackets: RK-EMX7
Outline
I/O Phantom power +48 V
On-board amplifiers Maximum output power
@4ohms
1kHz THD+N less than 10% (CEA2006) : 630 W + 630 W,
1kHz THD+N less than 1% (CEA2006) : 500 W + 500 W
Maximum output power
@8ohms
1kHz THD+N less than 10% (CEA2006) : 460 W + 460 W,
1kHz THD+N less than 1% (CEA2006) : 370 W + 370 W
I/O Control and others FOOT SWITCH : Effect Mute on/off
Bus Stereo: 1, AUX: 2 (Including FX)
Input Channel Function PAD 30 dB (CH1-4)
HPF 80 Hz, -12 dB/oct. (CH1–3)
COMP 1-knob COMP (CH1–4)
EQ HIGH 10 kHz +15 dB / -15 dB (Shelving)
EQ MID 2.5 kHz +15 dB / -15 dB (Peaking)
EQ LOW 100 Hz +15 dB / -15 dB (Shelving)
On-board processors DSP SPX Algorithm 24 programs, Feedback suppressor, Master
EQ, Monitor EQ
Level Meter 2 × 7 points LED meter (-20, -10, -6, 0, +6, +10, PEAK)
I/O Inputs TOTAL 12 channels : 8 Mono (MIC/LINE), 4 Stereo (LINE)
Outputs SPEAKERS [A, B], AUX1 SEND, AUX2 SEND, STEREO
OUT [L, R], REC OUT [L, R]
Input Channel Function Hi-Z Supported (CH4)
umfangreicher Effektausstattung, Equalizer und integrierter Feedbackunterdrückung sowie
hocheffizienter 630W-Endstufe.
• 2x 630W [4Ohm], 2x 460W [8Ohm] (1kHz THD+N weniger als 10% CEA2006)
• 2x 500W [4Ohm], 2x 370W [8Ohm] (1kHz THD+N weniger als 1% CEA2006)
• Leistungsstarke, hocheffiziente Class-D-Endstufe
• 12 Line-Eingänge (8 Mono + 4 Stereo)
• Hochohmiger High-Z-Eingang (Kanal 4) für den direkten Anschluss von Gitarren und Bässen
• 1-Knopf Master EQ™
• Onboard-Feedback-Unterdrückung
• 24 unterschiedliche, professionelle Effekte
• Metallgehäuse für den langlebigen Einsatz on the road
• Große Tragegriffe für erhöhten Schutz und perfekte Mobilität
• Universal-Netzteil für bedenkenlosen Einsatz bei Stromschwankungen
• Optionales Rack-Montage-Kit erhältlich
Technische Daten:
Total harmonic distortion Input to SPEAKERS: 0.1% @ 10 W (40 Hz to 20 kHz),
0.05% @ 50 W (1 kHz) ; Input to STEREO OUT, AUX1
SEND, AUX2 SEND: 0.03% @ +14 dBu (20 Hz to 20 kHz),
0.007% @ +20 dBu (1 kHz), (THD+N, measured with 22 kHz
LPF)
Hum & noise level Equivalent input noise -117 dBu (Noise is measured with A-weighting filter)
Residual output noise Input to SPEAKERS : -70 dBu(40Hz to 20kHz, STEREO
MASTER LEVEL: min); Input to STEREO OUT, AUX1
SEND, AUX2 SEND : -82dBu(20Hz to 20kHz, STEREO
MASTER LEVEL: min) (Noise is measured with A-weighting
filter)
Crosstalk -85 dB (1 kHz, Measured with 1 kHz band pass filter)
Protection circuit Load protection DC-fault
Amplifier protection Over heat protection, Over current protection, Integral power
protection
Power supply protection Over heat protection, Over current protection
Power requirements AC 100-240V, 50Hz/60Hz
Dimensions W 465 mm (18 5/16")
H 308 mm (12 1/8")
D 325 mm (12 13/16")
Net weight 9.5 kg (20.9 lbs)
Accessories Owner’s Manual, Technical Specifications, AC power cord
(2.5 m)
Power consumption 42 W (Idle) / 210 W (1/8 Power)
Others Operating Temperature : 0 to +40° C
Frequency response Input to SPEAKERS : +1 dB/-3 dB (40 Hz to 20 kHz), Input
to STEREO OUT, AUX1 SEND, AUX2 SEND : +0.5 dB/-1
dB (20 Hz to 20 kHz) , refer to the nominal output level @ 1
kHz
Options Foot switch: FC5, Rack-mount brackets: RK-EMX7
Outline
I/O Phantom power +48 V
On-board amplifiers Maximum output power
@4ohms
1kHz THD+N less than 10% (CEA2006) : 630 W + 630 W,
1kHz THD+N less than 1% (CEA2006) : 500 W + 500 W
Maximum output power
@8ohms
1kHz THD+N less than 10% (CEA2006) : 460 W + 460 W,
1kHz THD+N less than 1% (CEA2006) : 370 W + 370 W
I/O Control and others FOOT SWITCH : Effect Mute on/off
Bus Stereo: 1, AUX: 2 (Including FX)
Input Channel Function PAD 30 dB (CH1-4)
HPF 80 Hz, -12 dB/oct. (CH1–3)
COMP 1-knob COMP (CH1–4)
EQ HIGH 10 kHz +15 dB / -15 dB (Shelving)
EQ MID 2.5 kHz +15 dB / -15 dB (Peaking)
EQ LOW 100 Hz +15 dB / -15 dB (Shelving)
On-board processors DSP SPX Algorithm 24 programs, Feedback suppressor, Master
EQ, Monitor EQ
Level Meter 2 × 7 points LED meter (-20, -10, -6, 0, +6, +10, PEAK)
I/O Inputs TOTAL 12 channels : 8 Mono (MIC/LINE), 4 Stereo (LINE)
Outputs SPEAKERS [A, B], AUX1 SEND, AUX2 SEND, STEREO
OUT [L, R], REC OUT [L, R]
Input Channel Function Hi-Z Supported (CH4)
