LD Systems FX 300 SET - 2-Channel Effect Pedal with carrying Bag and Power Supply
Delivery time: 1-3 business days
- Effects processor with 16 digital effects presets in 16-bit quality
- Water-repellent bag with 8 mm padding
- Power supply unit with 9-volt DC at 500 mA
When you take the stage as a singer-songwriter or perform a living room concert, the quality of your sound plays a crucial role in how you are received by the audience. With the FX 300 SET from LD Systems (consisting of effects processor, transport bag and power supply), they will be convinced from the first tone you make - even if there was no time for a proper sound check. The practical little device is not only an effect pedal for your voice and instrument, but also a handy 2-channel mixer. Best of all, the mute functions can be controlled by pedals using your feet or hands. If you want to make an announcement, you can use the FX MUTE pedal to mute all effects so that your voice can be heard clearly without reverberation or delay. If you want neither your microphone signal nor that of your instrument to reach the outputs, simply tap MUTE ALL - extremely practical during breaks or at the end of your set.
The FX 300 offers 16 digital effect presets in 16-bit quality, 2 inputs with separate gain setting and two outputs: one balanced and one unbalanced. Thanks to the +48 V phantom power supply at the mic input, you can connect either a condenser or dynamic microphone. The high-impedance, low-noise instrument input produces impressive sound not only for acoustic guitar and bass, but with any instrument. Thanks to generous headroom, you no longer have to worry about distorted signals. And just in case no power outlet is nearby, the FX 300 can be operated with a 9-volt battery for up to five hours.
| Product type | Artist Pedal |
| Type | Set |
| Weight | 0,89 kg |
LDFX300 - FX 300
| Product type | Artist Pedal |
| Type | Home-Recording, Live |
| Channels | 2 |
| HEADLINE 1 | Microphone channels |
| Microphone channels | 1 |
| Mic inputs | XLR/6.3 mm jack |
| Frequency Response Microphone Channel | 50 - 20000 Hz |
| Amplification range Microphone channel XLR input | 42 dB |
| Mono Mic Input Input THD-N | <0 ,03%< d> |
| Impedance XLR input | 6000 Ohm(s) |
| Phantom power | +48V DC to XLR Input |
| Microphone channel Jack input Input type | Electronically balanced |
| Amplification range Microphone channel Jack input | 20 dB |
| THD jack input | <0.045 %< d> |
| Microphone Equalizer | +5/-8dB @ 8kHz |
| Microphone channel controls | FX SEND, Gain, tone |
| Microphone Channels Display Elements | channel signal |
| HEADLINE 2 | Instrument channels |
| Instrument inputs | 1 |
| gain range | 23 dB |
| THD | 0.03% |
| Equalizer | +7/-8dB @ 10kHz |
| Channel Inserts | 1 |
| Controls | FX SEND, Gain, tone |
| Indicators | 3-colour LED (SIG), channel signal |
| HEADLINE 3 | Main Section |
| Line outputs | 2 |
| Line output connectors | 6.3 mm TRS, XLR |
| Output level XLR | Max. +17dBu, balanced |
| Impedance XLR output | 150 Ohm(s) |
| Output level Jack output | Max. +5dBV, unbalanced |
| Impedance jack output | 40 Ohm(s) |
| Digital Effects Processor | Yes |
| Number of Presets | 16 |
| Main section controls | DFX Presets, FX MUTE, MIX OUT, MUTE ALL, Power |
| Display elements Main section | Effekt-Clip, FX MUTE, MUTE ALL, red LED (FX CLIP) |
| HEADLINE 4 | General Specifications |
| Operating voltage | 9 V block, External mains adapter 9 V DC / 250 mA (not included |
| Ambient temperature ( in operation ) | 0 - 40° °C |
| Relative Humidity | < 80% (non-condensing) |
| Width | 160 mm |
| Height | 55 mm |
| Length | 163 mm |
| Weight | 0,65 kg |
| Features | Preparation for microphone stand mounting |
LDFX300BAG - FX 300 BAG
| Type | Soft carrying case with shoulder strap |
| Material | Nylon 1680D |
| Color | Black |
| Thickness of the padding | 8 mm |
| Height | 90 mm |
| Width | 180 mm |
| Depth | 230 mm |
| Weight | 0,18 kg |
LDFX300PS - FX 300 PS
| Product type | Power Supplies |
| Mains connector | IEC connector |
| Input voltage | 100 - 240 V |
| Output voltage | 9 V |
| Max. output current | 0.5 A |
| Polarity | Center negative |
| Cord length | 150 cm |
| Width | 35 mm |
| Depth | 55 mm |
| Height | 60 mm |
| Weight | 0,06 kg |
