Artecta Cartago Dropper 2835 - 160 - CCT
Item number: A0872227
Artecta Cartago Dropper 2835 - 160 - CCT
2700 K - CRI 90 - 1800 lm/m - 160 LEDs/m - 14.4 W/m - 24 V
Features:
Soft white 2700 K colour temperatureCRI 90
24 V DC, 14.4 W/m
160 LEDs per metre
IP62
Easy to install with adhesive 3M backing
10 mm wide
To help you find the right LED strip for your application, we have categorised our LED strips in series and ranges. The Cartago series is EPREL-compliant, requires a 24 volt power supply and is available in lengths of 5 meter. The Ribbon range includes our IP20-rated LED strips for indoor use in dry conditions. Our Dropper range uses a silicone spray coating and is IP62 rated for use in humid conditions. Our Tube range uses a silicone sleeve to protect the LED strip from dust and water ingress, achieving a protection grade of IP65. And our Jade range has a silicone sleeve that is completely filled with silicone, resulting in an IP68 rating. However, please note that permanent outdoor installation of the LED strips is not recommended as the silicone is not UV resistant. Our Halo range uses COB LEDs and offers the most even light distribution with indistinguishable light sources.
If you don’t require EPREL-compliant LED strips, please have a look at the Havana series. For lengths of over 5 metre, a higher supply voltage is mandatory. For this, we offer our Cali series, which uses a power supply voltage of 48 volts for strips of up to 50 metres.
The Artecta Cartago Dropper 2835 - 160 is an IP62-rated LED strip with 160 LEDs/m, that has a silicone spray coating. It is suitable for humid environments, but should not be used in wet conditions. The LED strip is available in colour temperatures from soft white to neutral white (2700 K to 4000 K) and has a high CRI of 90. With a self-adhesive backing it is easily installed on a smooth, degreased surface. It is best used in an aluminium profile (to cool the LED strip by convection*).
The Cartago Dropper series complies with the latest energy saving regulations (EPREL). Please note that permanent outdoor installation of the LED strips is not recommended as the silicone is not UV resistant and due to manufacturing conditions, photometric data may vary between production batches within the EU directive.
* for proper heat dissipation, the profile should NOT be closed with a cover.
If you don’t require EPREL-compliant LED strips, please have a look at the Havana series. For lengths of over 5 metre, a higher supply voltage is mandatory. For this, we offer our Cali series, which uses a power supply voltage of 48 volts for strips of up to 50 metres.
The Artecta Cartago Dropper 2835 - 160 is an IP62-rated LED strip with 160 LEDs/m, that has a silicone spray coating. It is suitable for humid environments, but should not be used in wet conditions. The LED strip is available in colour temperatures from soft white to neutral white (2700 K to 4000 K) and has a high CRI of 90. With a self-adhesive backing it is easily installed on a smooth, degreased surface. It is best used in an aluminium profile (to cool the LED strip by convection*).
The Cartago Dropper series complies with the latest energy saving regulations (EPREL). Please note that permanent outdoor installation of the LED strips is not recommended as the silicone is not UV resistant and due to manufacturing conditions, photometric data may vary between production batches within the EU directive.
* for proper heat dissipation, the profile should NOT be closed with a cover.
Specification:
Light Source Quantity/m: 160LED Colour Type: WW
Light Source System: SMD2835
Lumen output/m: 1800 lm
CRI: 90
CCT: 2700 K
Power Supply: 24 VDC
Power Consumption: 72 W
Power/1 m: 14.4 W
Length (m): 5 m
Cutting Length: 50 mm
Width (mm): 10 mm
IP Rating: IP62
Energy Efficiency Class: E
